Contributor Guide

We appreciate any and all opportunities to improve our documentation, and your contributions are welcome! To ensure a high-quality documentation experience, we have some guidelines for contributors who wish to create.

FAQ

How do I report content inaccuracies or errors?

• Prepare to write write down what you've found:
  • Note the URL of the page using your browser's address bar.
  • Note the section where the inaccuracy is located.
  • Have in mind a way to share what you've found and why you believe it is inaccurate.
• Create a new issue
  • Click "Get Started" next to "Inaccuracy Report".
  • Write a brief title that closely describes what you found.
  • Under "What is Inaccurate?" please write the specifics of what content is not accurate or contains errors, and any relevant explanations.
  • Under "Where is the Inaccuracy?" please paste the URL of the page from your browser's address bar, along with the section where you found inaccuracy.

Creating Content

We welcome content from our community! Most style choices and formatting are automated by our VSCode development environment, and most validation steps are automated with pre-commit hooks and CI/CD.

If you wish to use VSCode, read Our Preferred Development Environment, and most of the work should be taken care of for you. VSCode will provide syntax highlighting and formatting automatically if you install the recommended extensions. Some linter warnings cannot be fixed automatically, so please pay close attention to what they say, and reference our Style Guide for guidance.

If you choose not to use VSCode, be mindful of our Style Guide section below for guidance on how to craft content that meet our standards. Our Automation

If you need assistance, please feel free to contact us.

Our Preferred Development Environment

We understand that everyone has differing preferences when it comes to development environments, so please feel free to use the development environment of your choice. Please be aware that our content has been developed using VSCode and a collection of extensions, so the greatest level of support can be provided by us to you if you choose to use our tooling.

We are using Visual Studio Code (VSCode) for development with several extensions installed, listed below. The extensions are also in .vscode/extensions.json and should pop up as recommendations when you open this repository. We use VSCode for the productivity benefits related to local Anaconda environment management, git integration, and dynamic formatters and linting. Linting is provided by pre-commit hooks and in our Continuous Integration definitions.

VSCode may be obtained from Visual Studio Code and documentation is available at VSCode: Docs. The extensions should automatically show up as recommendations when opening the repo, or they can be downloaded using the VSCode Extensions menu (Ctrl+Shift+X on Windows or Cmd+Shift+X on Mac).

We assume you have a conda distribution on your local machine. If you are affiliated with UAB, please install Miniforge. For detailed installation instructions, see here: https://github.com/conda-forge/miniforge/?tab=readme-ov-file#install. For more information on using conda, see our Anaconda page.

Style Guide

Documentation Markdown Files

Documentation file style is automated and enforced by markdownlint through Continuous Integration when a Pull Request is made and when changes are pushed to the main branch. Linting is controlled by the .markdownlint.json file in the repository root. Linting codes are documented here: https://github.com/DavidAnson/markdownlint/tree/main/doc. Our choices are outlined below. We are using markdownlint-cli2 for markdown linting.

To manually lint, see here.

Admonitions are allowed, see here for how to use them and pass markdownlint limitations.

Sometimes the Table of Contents, rendered on the right-hand side of pages, can get long or deeply nested, becoming hard to scan. If this happens on a page, use the front matter snippet. Move the caret to the top of the document, access the snippets menu from the command palette Ctrl+Shift+P, select "Snippets: Insert Snippet", then select front matter. The default level is 3, but this can be adjusted as needed.

Headings

• MD003: Open ATX headers denoted by one or more leading hash # characters.
• MD022 - Headings: Headings must have exactly one blank line before and one after.
• MD025 - Headings: Only one top-level heading (single hash # character) allowed per file.
• MD041 - Headings: The first line in each file must be a top-level heading (single has # character).
• MD043 - Headings: Heading structure is not prescribed.

Whitespace

• MD009 - Whitespace: Trailing spaces not allowed.
• MD010 - Whitespace: Hard tab characters \t not allowed.
• MD012 - Whitespace: Multiple consecutive blank lines not allowed.
• MD030 - Whitespace: Exactly one space character between list item markers and list item contents, e.g., 1. item.

Lists

• MD004: Unordered list items markers are the dash - character.
• MD007: Unordered list indentation of 4 characters.
• MD029: All ordered list item markers are 1. to provide consistent width and spacing for improved readability.

Code Blocks

• MD031: Fenced code blocks must have exactly one blank line before and one after.
• MD040: Fenced code block language may contain additional content, allowing the use of, e.g., line numbering with mkdocs-material.
• MD046: Code blocks must be fenced style, e.g., surrounded by ```.
• MD048: Fenced code blocks must use backtick ` characters.

Misc

• MD013: Line length not enforced. Use word wrapping in your editor instead.
• MD033: No HTML elements allowed, e.g. <br>.
• MD035: Horizontal rules must be exactly ---.
• MD044: Proper names should have correct capitalization. Code blocks are excluded, HTML elements are included. See the .markdownlint.json file, in the repository root, for a complete list.
• MD049: Emphasized text (this text is emphasized) must use single underscores, e.g., _this text is emphasized_.
• MD050: Strong text (this text is strong) must use double asterisks, e.g., **this text is strong**.
• MD055: Table rows must have leading and trailing pipe | characters.

CSV Files for Markdown Tables

Prefer to use commas , as separators, quoting entries with double quotes " where necessary. These are required by the default table reader plugin settings. Formatting and style are not automated at this time.

Most simple markdown formatting used within CSV Files will be rendered as expected. We encourage cross-linking from within tables to other parts of the documentation, or linking to external resources, as appropriate. Most VSCode markdown extension features do not function within CSV tables, and these are not linted at this time.

mkdocs.yml

Style is not automated at this time as the cost is greater than the benefit. Entries in the following keys should be sorted alphabetically. Write lists and maps in the dashed style, rather than the bracketed [] style.

• markdown_extensions:
• plugins
• plugins: redirects: redirect-maps:

build_env.yml

Style is not automated at this time as the cost is greater than the benefit. Entires in the following keys should be sorted alphabetically.

Development

The workflow below assumes you are using VSCode and all of the prerequisites listed above. Some familiarity with git and GitHub are assumed.

Obtaining a Working Copy of the Repository

Before you can get started working on contributions, you'll need a copy of the repository. The first step, done only once, is to fork the repository in GitHub to your personal account. The repository is located at https://github.com/uabrc/uabrc.github.io. More in-depth documentation on forking can be found at GitHub: Fork a Repo.

Once the fork has been created, you can clone your fork using the Command Palette (Ctrl+Shift+P) and Git: Clone... in VSCode, or at the command line. More information on cloning can be found at GitHub: Cloning a Repository. More information on using git can be found at our git page.

Local Machine Setup (Laptop/Desktop)

1. Install conda on your machine using Miniforge.
2. Configure conda to be visible to VSCode. The Miniforge default install choices will help do this correctly for your operating system. Important: On Windows, do not add conda to your PATH variable as it can disrupt proper operating system functioning.

3. Install the conda environment from build_env.yml using the following command

   conda env create -f build_env.yml
   

4. Register the environment with this repository in VSCode:

   1. Open the Command Palette (Ctrl+Shift+P).
   2. Search for "Python: Select Interpreter" and select it.
   3. Search for the installed environment and select it.

Now pre-commit hooks should function as expected and manual validation is available on your local machine. You will also be able to build and serve the documentation locally to help you check your contributions before making a pull request.

To build the documentation locally, press F5 in VSCode to start a local server and open the docs in your browser. This is provided by the .vscode/launch.json file. Alternatively, use mkdocs serve --open in a terminal to get the same effect. Be sure you've got your conda environment activated! We recommend trying this now to test your setup.

Development Workflow

Create a working branch

You'll need to create a new branch on your local machine (the working branch). The purpose of a branch is to encapsulate a coherent set of changes to add or deprecate a feature, or fix a bug. Typically each bug is associated with one issue, or a set of very closely-related issues. See our Issue Tracker for available issues.

• A branch should be created to resolve an issue, and lives only until the issue is resolved.
• Give the branch a short but meaningful name for your intended changes.
• For bug fixes use names like fix-broken-link or fix-page-formatting.
• For new features or pages, use names like feat-lts-page or feat-accessibility-improvement.
• Command to create new branch in terminal: git checkout -b <name>.

Implement your changes

You'll need to add, remove or otherwise modify files as appropriate to implement the changes you intend.

• Stage and commit changes in small units as you go.
• Be sure you are on the correct branch, i.e. your working branch!

• VSCode facilitates staging and committing files.

  

Verify your changes

1. Activate your conda environment.
   1. Open the file test.py in the repository to start the Python extension.
   2. Select the interpreter using https://code.visualstudio.com/docs/python/environments#_select-and-activate-an-environment
2. Open a VSCode terminal using Ctrl+Shift+`.

3. Execute the command mkdocs serve

   

4. If a new browser tab does not open automatically, use your browser to navigate to http://localhost:8000.

5. Ensure your changes look and function as expected.

   

Make a pull request

1. Push your local working branch to your GitHub remote repository.
2. Navigate to the upstream repository at https://github.com/uabrc/uabrc.github.io.

3. Click the "Pull requests" tab and click the "New pull request" button.

   

4. Click the link "compare across forks".

   

5. There are four drop-down menus.

   1. The left two drop-down menus are for the base repository and should say uabrc/uabrc.github.io and main by default. Be sure that they do.
   2. In the third drop-down menu, select your fork.
   3. In the fourth drop-down menu, select your working branch.

   

6. Click the "Create pull request" button to open the pull request creation form.

   1. Give your pull request a concise and informative name. The name should describe what the pull request changes at a high level.
   2. In the description box, give details about what was changed at a conceptual level. The actual details of the changes can be viewed in the "Commits" and "Files changed" tabs.
   3. If you want reviewers to be able to make changes to your pull request (recommended) then leave the "Allow edits" checkbox checked.

   

Wait for review

From here your pull request will go through a review process. The following criteria are checked.

1. No linting errors
2. Correct formatting
3. Image alternate text (alt text)
4. Images must use the gallery functionality, formatted as ![!alttext](path/to/file). Note the leading ! in the alttext.
5. Valid internal and external links.
6. Quality, organization and accuracy of contribution.

We will do our best to check information for accuracy, as well as proofread the text. Bear in mind Research Computing staff time is limited and we are not infallible, so please double-check your pull requests! Your audience is your research colleagues at UAB and beyond, and possibly even you at a future date!

Automation

CI/CD

CI/CD is used to ensure consistency and formatting of markdown files via linting. Internal links are also checked for validity.

• Linting: markdownlint runs via markdownlint-cli2-action.
• Internal links are validated by the mkdocs build validation configuration.

Pre-commit Hooks

We use pre-commit hooks to ensure contributions match our standards for consistency, formatting, and URL validity prior to pull requests.

• Pre-commit runs markdownlint-cli2 on markdown files.
• Pre-commit runs mkdocs build to validate links.
  • Internal links are validated by the mkdocs build validation configuration.

The mkdocs-htmlproofer-plugin can take substantial time to run. To disable it modify the file .htmlproofer.env to read ENABLED_HTMLPROOFER=False. Be sure not to commit this change! It is recommended to discard this change and re-run validaitions before submitting a pull request.

To use the pre-commit hooks, you must have conda on your system PATH and have installed the bundled build_env.yml environment.

Manual Validation

Use the command pre-commit run --all-files > pre-commit-out.log 2>&1 to run all pre-commit hooks and store the results in the file out.log for simpler review within VSCode.

Manual Markdown Linting

We are using markdownlint-cli2 for markdown linting.

1. Install build-env.yml and activate
2. Run markdownlint-cli2 "**/*.md" "#node_modules" 2> markdownlint-cli2-out.log
3. Review markdownlint-cli2-out.log

We use .markdownlint.json to handle markdown formatting rules, rather than placing it in .markdownlint.json.

Manual Documentation Build

1. Install build-env.yml and activate
2. Run mkdocs build --strict > mkdocs-build-out.log 2>&1
3. Review mkdocs-build-out.log

External URL Validation

We are using linkchecker to validate external repository URLs.

1. Install build-env.yml and activate
2. Run python scripts/linkchecker.py
3. Review out/linkchecker-out.csv (feel free to ignore out/linkchecker.log unless you want verbose details)

The urlname column contains the URL as it is written in the documentation. The url column contains the resulting URL after all forwarding is complete.

Linting Known Issues

There are known issues with the markdown linter and some of our non-standard plugins, especially admonitions (specifically a conflict involving fenced vs indented code blocks). To fix these cases please use one of the following methods. The $MD_LINTER_CODE can be found by hovering over the yellow squiggles in VSCode to bring up the warning lens.

Please do not use these to silence all linter warnings, only for fixing known issues. Please read the warning lenses given by VSCode to identify the cause of the warning.

Silence Linter Warning for a Block

<!-- markdownlint-disable $MD_LINTER_CODE -->
`linter error here`

`maybe multiple lines`
<!-- markdownlint-enable $MD_LINTER_CODE -->

Silence Linter Warning for a Single Line

We encourage denoting the warning being silenced here by filling out the $MD_LINTER_CODE, though it isn't required for the single line case.

<!-- markdownlint-disable-next-line $MD_LINTER_CODE -->
`linter error here just for this line`

False Positive Lint Warnings from Admonitions

We allow and encourage the use of admonitions in our documentation, where appropriate. Because these are created using a plugin and are "non-standard" markdown, the VSCode markdownlint extension does not recognize admonitions and may produce a false positive warning about inconsistent code block styles.

Two styles of code block are allowed in markdown: fenced and indented. To work around the false positive warning about admonitions, we require all code blocks to be fenced. All admonitions are assigned the warning MD046, which can be disabled by placing all admonitions in between the following comment block fences. The comment lines must be indented to the same level as the start of the admonition.

<!-- markdownlint-disable MD046 -->

<!-- markdownlint-enable MD046 -->

The process can be simplified in VSCode using the md046 disable snippet, included in this repository at .vscode/markdown.code-snippets. When used, the snippet will automatically surround selected text with the appropriate fencing to disable markdownlint MD046. To use the snippet, select all of the lines belonging to the admonition, open the Command Palette (Ctrl+Shift+P), select "Snippets: Insert Snippet", then search for md046 disable and select it.

This workaround is needed because markdownlint has no plans to add support for admonitions. There is no markdownlint plugin for that support either, and we don't have the ability to develop such a plugin.

File Organization

• Main headings are based on UAB Research Computing services
• Favor placing new pages and information into an existing section over creating
• Approach documentation from a problem solving angle rather than a technology. Examples:
  • Section title "Installing Software Yourself with Anaconda" vs "Anaconda"
  • Section title "Running Analysis Jobs" vs "Slurm"
• Put redirects for any page moves in case someone has bookmarked a page (see Redirect section below)

Redirects

If a page name must change, or the location of a page must change, it is necessary to create a redirect for that page so we don't break bookmarks and incoming links targeting our documentation.

Redirecting pages is possible using the plugin at https://github.com/datarobot/mkdocs-redirects. To redirect a page, add a line in mkdocs.yml under the following keys. The line takes the form original page location: new page location, and each side of : must be a full path under docs/. An example is below.

plugins:
  - redirects:
      redirect_maps:
        account_management/uab_researcher.md: account_management/cheaha_account.md

Maintain the list in alphabetic order.

Section Index Pages

To create a section index page:

1. Create a file called index.md in a reasonable directory location for that section.

2. Add something like the following to that section entry under nav: in mkdocs.yml.

   nav:
     ...
     - Cheaha Guide:
       - cheaha/index.md  # add the index.md here.
       - Hardware: ...
       - ...
     ...
   

3. When a site visitor clicks Cheaha Guide in the nav pane, the page cheaha/index.md will be loaded.

Accessibility Tools

• Color vision deficiency checker: https://www.toptal.com/designers/colorfilter/
• Contrast checker: https://webaim.org/resources/contrastchecker/

UAB Branding Guidance

• Brand main page: https://www.uab.edu/toolkit/branding
• Brand colors: https://www.uab.edu/toolkit/brand-basics/colors
• Copyright guidance: https://www.uab.edu/toolkit/trademarks-licensing/uab-trademarks

Reviewer Guidance

Note

Currently only RC Data Science staff have permissions to review pull requests.

Reviewing a pull request means obtaining a copy of the pull request branch and Verifying the Changes on your local machine or on your fork. GitHub provides a facility for obtaining pull request branches directly from the upstream repository.

Add upstream remote

Add the Upstream Remote using git remote add upstream https://github.com/uabrc/uabrc.github.io.git.

Pull the pull request

1. Fetch the pull request with git fetch upstream pull/<id>/head:<branch-name>.

   

   1. Replace <id> with the pull request id number.
   2. Replace <branch-name> with the branch name from the pull request source.

2. Checkout the branch using git checkout <branch-name>.

3. Follow the instructions for Verifying Changes
4. (Optional) make modifications to the pull request.
   1. Before starting, make sure that the pull request author has allowed edits to their branch.
   2. Add the Author's Fork as a Remote.
   3. Push changes to the Author's Fork. Be sure to push to the correct remote!

Internal Developer Notes

Slurm Hardware, Partitions, QoS Tables

Building hardware tables is a semi-automated script based on a manually curated table. The repository is located here: https://gitlab.rc.uab.edu/rc-data-science/metrics/rc-hardware. The repository is only accessible to developers at this time.

Building Partition and QoS tables is automated based on scontrol output. The repository is located here: https://github.com/wwarriner/slurm_status_tools. To use, install the conda environment at the linked repo, activate it, and run the following commands.

python -u sstatus.py -c partitions > partitions.csv
python -u sstatus.py -c qos > qos.csv

Terminology

• Research Computing (RC) for the IT group supporting campus HPC resources.
• UAB Campus Network for the hard-wired network physically located on UAB campus, and the UAB WiFi Network ("UABSecure").
• UAB Campus VPN for the VPN to tunnel remote connections through the UAB Campus Network.